3 Tips to Help You Avoid the Need for Appliance Repair

1Our household appliances play a vital role in our daily lives and we rely so much on them. They keep our food cold or hot, our dishes and clothes clean, so on and so forth. Thus, we could all agree that the moment one of the major appliances stops working, we’re faced with a dread that we must either call a repair service or prepare ourselves and buy a new one instead. Fortunately, there are a number of ways that could help you prevent these unnecessary repairs. Here are the 3 tips to help you avoid the need for appliance repair.

Tip #1: Never Block the Air Vents
The refrigerator and freezer compartments should have proper air flow in order to keep the foods at the right temperature and prevent spoilage. So, it’s important to think twice before buying warehouse-size packs of frozen foods that could feed a family of eight. If you’re not aware, jamming your freezer with huge packs could block the vents and this would result to cooling problems in the refrigerator. The result? It would force the fans and compressor to run overtime, leading to premature compressor and fan failures. Replacing a refrigerator fan isn’t cheap at all. It could cost you more or less $150. What’s worse, if it’s the compressor that fails, there’s no possible way to fix it and you need to buy a new one.

Tip #2: Don’t Slam the Doors
Slamming dryer or washer doors could break switches and replacing them aren’t even cheap at all. In Ohio You can Call www.qualityappliancerepairs.com/columbus/

Check here too.

It doesn’t matter if you have a valid reason why you’re slamming or dropping the lid or door of your washer, your appliances wouldn’t honor these. So, forget those excuses, and keep in mind that if you’re going to slam the lid of your washer, you better have enough money to have it fixed– which is around $175. The choice is yours. You could either avoid this repair by gently closing the door, or continue with your habits and waste your hard-earned money.

Tip #3: Don’t Spray Switches
A lot of people clean their dishwasher and stove knobs, as well as the touch-control panels with the help of a spray cleaner. These liquids could easily work their way into the switches and would lead to short circuits. The repair bill for a shorted stove igniter switch could cost you $135 and if you’re lucky enough, the control panel could easily take away $350 from your savings. So, just spray a little liquid on a rag or sponge and clean them manually. It’s a great way to prevent shorting.

You can find more information at Best appliance repair service in Tampa.

Appliance Repair Tampa Delta
10424 N Florida Ave
Tampa, FL 33612
Phone: (813) 701-2335

You also may be interested in Checking out:

appliance repair technician,appliance repair washer,appliance repair refrigerator,appliance repair dishwasherappliance repair dryer,appliance home repair,appliance repair microwave,appliance repair in,appliance refrigerator repair,appliance repair training,appliance home repair,appliance repair training,appliance repair training,appliance repair training,appliance refrigerator repair,appliance repair training,appliance repair training,appliance home repair,appliance repair local,appliance repair dishwasherappliance repair dryer,appliance repair technician,appliance repair companies,appliance repair in

Stove Repair in Tampa

Stove Repair & Appliance Repairs by Yourself

In the present times, we all depend on the electrical appliances heavily for carrying out our day to day work. Failure of any one of these like a stove can create a horrible situation for us. We need to repair it as fast as possible to restore

the appliances into their erstwhile condition. We normally seek professional services for repairing, however we can do it ourselves as well with a little bit of care.

Before beginning the stove repair, you should check out if the fuse is working or not. Go through the manual to find out where the fuse lies. In most electric stoves, the fuse is positioned at the back. They can even be found near the burners.

Remember to cut power to be safe before touching the fuse. If the fuse is in good shape, then there might be a problem with the heating element which is located at the bottom and is a U-shaped piece of metal. Unscrew it and remove the wires

to test the element. Check it with the help of a multi-meter. It should provide a reading of 10-40 ohms to be running properly. If it is not, then replace the element.

Now there may be a problem with the glowbar as well. It is the element which helps the burner to light up. Unplug the range and check the glowbar located at the rear of the oven. Check it with a multi-meter as well and if it shows a moderate reading then it is fine otherwise you have to replace it as well. https://bestappliancerepairtampa.wordpress.com

There are various electronic controls on your oven. If the digital clock is not working, then you may have to check the fuse again. However, be very careful while dealing with the fuse. If there is no fault with the fuse, then the timer and the clock are faulty, so better you get them replaced. Disconnecting the timer depends on the kind of model you are using.

Some open easily some do not. Have patience and try it slowly.

Electrical appliances are not very difficult to repair. Appliance repairs can be done easily on our own if we are a little bit careful and use our own common sense. However, if you are not able to figure out the problem successfully, then it would be wise enough to call a professional and get the problem fixed easily and comfortably without any sort of inconvenience.



Open 7 days now

Posted by Appliance Repair Tampa on Friday, January 8, 2016